1. 国家自然科学基金青年项目：《基于位错网络多尺度调控的钼铼合金复合强韧化机制研究》，项目编号：52504423，2026.1.1-至今（主持）

2. 陕西省自然科学基础研究计划：《超塑成形用轻质AlCoCrFeMnNi高熵合金制备及多尺度本构模型研究》，项目编号：2025JCYBQN490，2025.1.1-至今.（主持）

3. 西安市重点产业链技术攻关一般项目：《高端装备增材制造用纳米球形钼粉制备关键技术》，项目编号：2024JHCLYB0029，2024.6.1-至今.（主持）

4. 陕西省博士后基金一等资助：《搅拌摩擦加工SP700钛合金低温超塑性及细晶制备调控机制》，项目编号：2023BSHYDZZ146，2024.1.1-至今.（主持）

5. 国家自然科学基金面上项目：《新型La-TZM钼合金微观组织调控与强韧化机制研究》，项目编号：52374401，2024.1.1-至今.（参与）

6. 国家重点研发计划：《耐超高温抗蠕变难熔金属材料及复杂构件制备技术》，项目编号：2022YFB3705401，2022.11.1-至今.（参与）

2025年：

1. Junzhou Yang, Shichen Wang, Kuaishe Wang, Yongqiang Fang, Hua Wang, Li Wang, Hairui Xing, Ping Hu,.Molybdenum-Rhenium alloy: A focused review of strengthening-toughening mechanism and method:International Journal of Refractory Metals and Hard Materials,2025,134:107408

2. S. Wang, J. Wang, J. Yang, H. Wang, Y. Li, W. Zhang, L. Wang, H. Xing, P. Hu, Q. Wang, R. Feng, B. Jin, K. Wang.Optimizing feasible domains for parameter identification in multi-scales constitutive model of La-TZM alloy:International Journal of Refractory Metals and Hard Materials,2025,131:107218

3. Q. Yang, X. Hua, C. Quan, H. Wang, L. Wang, H. Xing, J. Yang, Q. Wang, P. Hu, K. Wang.Microstructure evolution and strengthening mechanism of boron doped molybdenum alloy solid solution rolled plates:Journal of Alloys and Compounds,2025,1035:181568

4. J. Yang, X. Wang, S. Wang, Z. Wang, H. Xing, K. Wang, B. Hu, L. Wang, P. Dang, P. Hu,.A Review of Grain Evolution Effect on Accommodation Mechanism, Modeling, and Processing of Superplastic Titanium Alloys:JOM,2025,77:1923–1939

5. ,X. Wang, J. Yang, S. Wang, Q. Wang, L. Wang, H. Xing, Y. Li, W. Zhang, M. Muzamil, P. Hu.Mechanisms of pore defects evolution in Mo 14Re alloy welded joints under dislocation back stress:International Journal of Refractory Metals and Hard Materials,2025,130:107155

6. ,S. Wang, J. Yang, P. Hu, X. Wang, Z. Wang, Q. Wang, R. Feng, B. Jin, K. Wang.Research on the high-temperature deformation constitutive model of La-TZM alloy:Journal of Materials Science,2025,60:13745–13764

7. Q. Yang, X. Hua, C. Quan, H. Wang, L. Wang, H. Xing, J. Yang, Q. Wang, P. Hu, K. Wang.Enhanced mechanical properties and thermal stability of boron doped molybdenum alloy:International Journal of Refractory Metals and Hard Materials,2025,133:107354

2024年：

1. J. Yang, Q. Zhang, K. Wang, J. Wu, P. Hu,.A multi-scale constitutive model based gas pressure determination method for the grain size evolution of superplastic forming:International Journal of Lightweight Materials and Manufacture,2024,7:825–837

2. 王先俊, 杨俊宙, 王世臣, 王智轩, 胡卜亮, 王力, 白润, 高选乔, 张文, 胡平.Mo-14Re合金热变形行为及热加工图:稀有金属材料与工程,2024,53:2891–2896

3. L. Wang, W. Zhao, C. Man, L. Gao, J. Han, B. Hu, J. Yang, P. Hu, K. Wang, C. Dong.Optimization the cracking and corrosion resistance of MoSi2 coating by addition of TiVAlZrNb high-entropy alloy on laser powder bed fusion high-strength stainless steel:Materials Characterization,2024,211:113922

4. S.-W. Ge, P. Hu, J. Deng, S.-L. Li, H.-R. Xing, J.-Y. Han, X.-J. Hua, L. Wang, J.-Z. Yang, B. Jin, W. Zhang, K.-S. Wang.The effect of secondary phase on corrosion behaviors of the titanium–zirconium–molybdenum alloy:Tungsten,2024,6:342–354

5. W. Zhao, L. Wang, P. Hu, C. Man, J. Long, J. Han, J. Luo, Q. Chu, L. Gao, J. Yang.Enhancing the oxidation resistance of TZM alloy by laser-clading MoSi2-TiVAlZrNb composite coating:Surface and Coatings Technology,2024,478:130471

6. ,Z. Wang, J. Yang*, S. Wang, X. Wang, H. Xing, B. Hu, L. Wang, M. Muzamil, Q. Wang, R. Feng, L. Zhang, P. Hu.Crack generation and propagation mechanism of Mo 14Re alloy laser welding:International Journal of Refractory Metals and Hard Materials,2024,121:106684

7. M. Muzamil, S.A. Iqbal, M.N. Anwar, M. Samiuddin, J. Yang, M.A. Raza.Wear Behavior Assessment of New Wire-Arc Additively Manufactured Surfaces on AA6061 and AA5086 Alloys through Multi-Walled Carbon Nanotubes and Ni Particles Inducement:Coatings,2024,14:429

8. ,X. Wang, J. Yang, S. Wang, Z. Wang, N. Xiong, B. Hu, L. Wang, H. Xing, D. Dong, M. Muzamil, P. Hu.Mechanism of pore evolution in electron beam welding joints of Mo-14Re alloy:Journal of Materials Research and Technology,2024,30:6457–6463

9. ,X. Wang, J. Yang, B. Hu, B. Jin, S. Wang, Z. Wang, L. Wang, P. Hu.nvestigation on the recrystallization and mechanical properties of a novel TZM alloy with heat treatment:Materials Letters,2024,361:136092

10. A.S. Kamil, M. Muzamil, M. Akhtar, N. Alsaleh, R. Khan, M. Samiuddin, A.K. Siddiqui, J. Yang, J. Djuansjah.Indentation Behavior Assessment of As-Built, Solution, and Artificial Aged Heat-Treated Selective Laser Melting Specimens of AlSi10Mg:Crystals,2024,14:610

11. J. Yang, K. Wang, J. Wu, Q. Zhang, G. Zhao, P. Hu,.Effect of misorientation evolution on the fracture mechanism:Materials Letters,2024,357:135742

2023年：

1. J. Yang, J. Wu, H. Xie, Z. Li, K. Wang,.Mechanism of continuous dynamic recrystallization of Ti−6Al−4V alloy during superplastic forming with sub-grain rotation:Transactions of Nonferrous Metals Society of China,2023,33:777-788

2. S. Ma, B. Hu, Q. Shi, C. Quan, J. Han, H. Xing, L. Wang, J. Yang, B. Jin, P. Hu.Microstructure and high-temperature deformation performance of liquid-dispersed evaporated Nano-ZrTiO4 doping molybdenum alloy:Materials Characterization,2023,206:113455

3. T. Liu, P. Hu, S.-L. Li, Q.-S. Shi, R. Bai, B. Jin, B.-L. Hu, X. Wang, Li-Wang, J.-Z. Yang, K.-S. Wang.Oxygen content effect on mechanical properties and microstructure of TZM alloy:Materials Characterization,2023,203:113075

4. J. Yang, J. Wu, Z. Li, H. Xie, Z. Zhang, M. Wang,.The Mechanism of Slip System Activation With Grain Rotation During Superplastic Forming:Journal of Engineering Materials and Technology,2023,145:021007

5. L. Wang, M. Sun, J. Han, W. Zhao, J. Yang, B. Hu, W. Li, P. Hu, K. Wang, C. Dong.The effect of multiscale second-phase particles on the corrosion behavior of laser powder bed fusion high strength stainless steel:Materials Characterization,2023,205:113244

6. 韩晓宁, 杨俊宙, 吴建军, 李金山.超塑变形中硬化规律在多尺度数值模拟中的应用:铸造技术,2023,44:75-79

7. 杨俊宙, 王世臣, 王先俊, 王智轩, 王力, 邢海瑞, 胡卜亮, 高选乔, 张文, 胡平, 王快社,.Mo-14Re钼铼合金高温压缩耦合内变量的本构模型建立:稀有金属材料与工程,2023,53:1343–1348

8. M. Wang, J. Wu, J. Yang, Z. Zhang, Z. Yang, L. Liu.Mechanism of the reciprocal effects for bending and twisting during spatial tube forming:Journal of Manufacturing Processes,2023,90:219-225

2019~2022年（博士期间）：

1. 杨俊宙, 吴建军,.TC4钛合金超塑成形流变行为:塑性工程学报,2022,29:140–146

2. X. Han, J. Yang, J. Li, J. Wu.Constitutive Modeling on the Ti-6Al-4V Alloy during Air Cooling and Application:Metals,2022,12:513

3. X. Han, J. Yang, J. Li, J. Wu.Investigation of the Flow Behavior of Air-Cooling Ti-6Al-4V Alloy after Superplastic Forming:Crystals,2022,12:294

4. J. Wu, B. Liang, J. Yang.Trajectory prediction of three-dimensional forming tube based on Kalman filter:International Journal Of Advanced Manufacturing Technology,2022,121:5235–5254

5. J. Yang, J. Wu, Q. Zhang, Y. Ren, H. Ruolan, K. Wang,.Linear analysis of parameters in Arrhenius model for Ti-6Al-4V at superplastic forming:Engineering Computations,2021,38:2528–2551

6. J. Yang, J. Wu,.Grain Rotation Accommodated GBS Mechanism for the Ti-6Al-4V Alloy during Superplastic Deformation:Crystals,2021,11:991

7. Z. Zhang, J. Wu, B. Liang, J. Yang, M. Wang.Investigation to the torsion generation of spatial tubes in bending-twisting process:The International Journal of Advanced Manufacturing Technology,2020,107:1191–1203

8. J. Yang, J. Wu, Q. Zhang, R. Han, K. Wang,.Investigation of flow behavior and microstructure of Ti–6Al–4V with annealing treatment during superplastic forming:Materials Science and Engineering: A,2020,797:140064

9. Z. Zhang, J. Wu, B. Liang, M. Wang, J. Yang, M. Muzamil.A new strategy for acquiring the forming parameters of a complex spatial tube product in free bending technology:Journal of Materials Processing Technology,2020,282:116662

10. 尚琪, 乔顺成, 吴建军, 张增坤, 杨俊宙, 邬洪飞, 任银香.管件弯曲过渡区研究及回弹控制:塑性工程学报,2020,27:38-45

11. J. Yang, J. Wu, D. Yang, Q. Wang, K. Wang, Z. Zhang, M. Wang, M. Muzamil,.A Modified Constitutive Model With Grain Rotation for Superplastic Forming of Ti–6Al–4V Alloy:Journal of Engineering Materials and Technology,2020,142:021006

12. J. Yang, J. Wu, Q. Zhang, R. Han, K. Wang,.The simple hyperbolic-sine equation for superplastic deformation and parameters optimization:Journal of Materials Research and Technology,2019,9:10819–10829

13. M. Muzamil, J. Wu, M. Akhtar, Z. Zhang, A. Majeed, J. Yang.Modified TIG Welding Joint Process: An Approach to Improve Microstructure and Fracto-Mechanical Behavior by MWCNTs Inducement in Al-Mg-Si Alloy:Materials,2019,12:1441

14. M. Muzamil, J. Wu, M. Akhtar, V. Patel, A. Majeed, J. Yang.Multicomponent enabled MWCNTs-TiO2 nano-activating flux for controlling the geometrical behavior of modified TIG welding joint process:Diamond and Related Materials,2019,97:107442